Rangie big lift kit for sale!

Joined: 16 Jul 2003 Location: Latrobe Valley Victoria

have big lift springs I got through Rangie Automotive same rate as thier racing trucks only longer, I also have a new extented and balanced tail shaft to match I also have set of longer brake lines to match. All of this stuff has only done one trip which I broke three diff centers on due to large tyers 42" swampers and worked 5.7ltr chev. I am now in the process of fitting full nissan GQ running gear with rockcrwaling transfer and diffs, in destrucable cheesy racing nissan GQ CV's ectra, to my rangie also now been uteded. I want $550 for kit ONO call 0417572867 ask for Jeff.

Joined: 21 Feb 2003 Location: Melbourne

what are you doing with your old front and rear axles Cool

Joined: 07 Dec 2002 Location: Marsden QLD

That will do it!!

Lots of grunt and 42" tyres are not too forgiving on piss weak Rangie axles. The GQ stuff sounds interesting and at least you won't break it as easy as the Rangie stuff. As good as Rangies are, this is there weakest link overall!!

Good luck,

Aquarangie

Quote:

If it ain't broke, leave the bastard alone!!!!

Joined: 08 Nov 2002 Location: melbourne

how big is BIG ???

Joined: 16 Jul 2003 Location: Latrobe Valley Victoria

Well I am not sure exactly but it would have to be 4" if not more over standard :>

Joined: 29 May 2003 Location: hidin frm da wiminz!!!

Damn I am on the gold coast but am interested

ow i almost forgot what are the specs for the springs?????

Joined: 16 Jul 2003 Location: Latrobe Valley Victoria

as for the specs of the springs I guess you want to know what rate ect ? Well I am not sure they where cutom made and it took some time to get them but they will let your tyer tavle up and down with out the body been pushed up by the sping as most to heavy springs would do. Some also asked about the trailing arms, I will give my trailing arms frount and rear with the springs, brake lines and frount tail shaft, know that is very good value :> I also have a brand new never used rear A arm ball foint for $50 bucks if anyone is intrested?

Joined: 26 Oct 2002 Location: Geelong

Jeff,
what is the free lth of these springs.

Do you also know what the fitted lth was.

Regards
Michael.

Hows the project going so far.

Joined: 29 May 2003 Location: hidin frm da wiminz!!!

Yeah if you could measure the distance between your bumpstops and report that it would be nice.

Ow and are your front radius arms crank or lengthened aswell as the back if so then all i need to know know is how much its gonna cost me to get it to the gold coast Very Happy

cheers

Joined: 16 Jul 2003 Location: Latrobe Valley Victoria

I will mesure the distance between bum stops over the week end and report back on Monday, as for the arms they are just standard ones. One thing you would have to do is run a modifed cross member to allow clearance for the frount tail shaft I have one that you could have with it :>

Joined: 29 May 2003 Location: hidin frm da wiminz!!!

Cool I will await monday. Anyone know how much cost to get it to the Gold Coast would be??

Also with the bumpstop report can you let me knwo what accesories are on the truck bullbar, rear bar anything that involve abit of extra weight etc?

Cheers Very Happy

Joined: 16 Jul 2003 Location: Latrobe Valley Victoria

I mesured the bump stop clearance it is about 9" inches, I have steel bull bar on the car, there is no motor in it, but when I hang arround 100kilos off it drops about an inch :>

Joined: 29 May 2003 Location: hidin frm da wiminz!!!

Thats around 5.5-6inches of lift Shocked

(i like it) Very Happy

ow hang on NO MOTOR deerrrrr Embarassed

check your PM Very Happy