| Author |
Message |
hienuf

Joined: 29 Nov 2004
Location: sydney
|
Posted:
Wed Jan 19, 2005 2:13 pm |
|
hi all i just brought one.....ok im dreaming
does any1 own 1 in melbourne......i have seen a couple of h2 around allready, i know that hotel in the city has 1 but any actually out there that go off road.....would love to see 1 live in action. |
|
|
|
|
 |
WaveCult

Joined: 12 Aug 2003
Location: Melbourne
|
Posted:
Thu Jan 20, 2005 9:18 am |
|
sierrajim and gwagensteve should have some info for ya regarding that  |
|
|
|
|
 |
sierrajim

Joined: 11 Jun 2004
Location: Wheeling in my backyard
|
Posted:
Thu Jan 20, 2005 9:43 am |
|
there are a few Hummer H1's in Melbourne, as far as i know there are a few that are used as "tourers" i'm not 100% sure if anyone hardcore wheels them down here.
There was one entered into the winch challenges in NSW from memory.
The Hummer H2's will start to appear throught this coming year, however i think you will find that they will be treated as more of a range rover/toorak tractor.
The H1 and H2 do have amazing offroad capability with the H2 being the more civilized version. |
_________________ James
| MissForby wrote: |
| If you're going to ride my ar$e you could at least pull my hair |
|
|
|
|
 |
grimbo

Joined: 15 Nov 2002
Location: Driving my GU in Melbourne
|
Posted:
Thu Jan 20, 2005 9:45 am |
|
we have one in our club. It has been out on a few trips. They are big, really big which can be a problem on some tracks as the wheel ruts are nowhere near compatible. This can also be a bonus on some tracks too.
Not much room inside them either.
I don't see the point in using them for pretty much any Aussie wheeling. A Patrol or Cruiser can out do them in pretty much any situation if you need a big vehicle. |
_________________ YELLOW |
|
|
|
 |
sierrajim

Joined: 11 Jun 2004
Location: Wheeling in my backyard
|
Posted:
Thu Jan 20, 2005 10:02 am |
|
I think you would be refering to the H1.
The H2 has around 20% more space than Landcruiser and Patrol, factory rear diff lock, factory 34" tyres, 345hp etc etc.
The H1 is BIG, loud, relatively uncomfortable, but handy if you feel like invading another country  |
_________________ James
| MissForby wrote: |
| If you're going to ride my ar$e you could at least pull my hair |
|
|
|
|
 |
hienuf

Joined: 29 Nov 2004
Location: sydney
|
Posted:
Thu Jan 20, 2005 10:11 am |
|
thankx guys.....would i b right in saying gwagon steve's dad owns one or just same surname?
i think i saw it in 4wmonthly.
thankx again |
|
|
|
|
 |
WaveCult

Joined: 12 Aug 2003
Location: Melbourne
|
Posted:
Thu Jan 20, 2005 10:18 am |
|
| hienuf wrote: |
thankx guys.....would i b right in saying gwagon steve's dad owns one or just same surname?
i think i saw it in 4wmonthly.
thankx again |
Yeah you'd be right  |
|
|
|
|
 |
sierrajim

Joined: 11 Jun 2004
Location: Wheeling in my backyard
|
Posted:
Thu Jan 20, 2005 11:54 am |
|
here's a pic |
_________________ James
| MissForby wrote: |
| If you're going to ride my ar$e you could at least pull my hair |
|
|
|
|
 |
hienuf

Joined: 29 Nov 2004
Location: sydney
|
Posted:
Thu Jan 20, 2005 12:29 pm |
|
thankx 4 the pic....what a beast! |
|
|
|
|
 |
WaveCult

Joined: 12 Aug 2003
Location: Melbourne
|
Posted:
Thu Jan 20, 2005 1:27 pm |
|
| hienuf wrote: |
| thankx 4 the pic....what a beast! |
you could probably fit 2 Suzuki Sierra seats between the front seats of the Hummer actually... it didn't look very cramped last time I looked in it |
|
|
|
|
 |
grimbo

Joined: 15 Nov 2002
Location: Driving my GU in Melbourne
|
Posted:
Fri Jan 28, 2005 8:56 am |
|
| WaveCult wrote: |
| hienuf wrote: |
| thankx 4 the pic....what a beast! |
you could probably fit 2 Suzuki Sierra seats between the front seats of the Hummer actually... it didn't look very cramped last time I looked in it |
you didn't see the huge transmission tunnel that runs down the middle of the cab  |
_________________ YELLOW |
|
|
|
 |
Utemad

Joined: 02 Aug 2004
Location: Brisbane
|
Posted:
Fri Jan 28, 2005 3:30 pm |
|
Isn't the H2 the GM built version that was built on the Chevy Tahoe platform? While the H1 is the civvy version of the Humvee? |
_________________ 1994 Land Rover Discovery update manual V8 |
|
|
|
 |
83 lux

Joined: 02 Nov 2002
Location: near jimboomba
|
Posted:
Tue Feb 08, 2005 10:23 am |
|
| sierrajim wrote: |
| toorak tractor |
bwhahahaha
Mud runners
that is the first time i have seen that on here and i LOVE IT when ppl use it
ps i was born in sale |
_________________ Sponsored by
Superior Eng. ,& Tuff mud
Carrolls Springs
Fourbys
HOOLAY |
|
|
|
 |
sierrajim

Joined: 11 Jun 2004
Location: Wheeling in my backyard
|
Posted:
Tue Feb 08, 2005 10:47 am |
|
The hummer H2 is built on a form of the 2000-current Suburban chassis |
_________________ James
| MissForby wrote: |
| If you're going to ride my ar$e you could at least pull my hair |
|
|
|
|
 |
Utemad

Joined: 02 Aug 2004
Location: Brisbane
|
Posted:
Tue Feb 08, 2005 11:49 am |
|
|
|
|
 |
"CANADA"
Joined: 29 Nov 2004
Location: Townsville
|
Posted:
Wed Feb 09, 2005 6:46 pm |
|
yes the h2 is jsut built on the american version of the silverado 1500 chasis...its pretty sad acualy |
_________________
| dazza30875 wrote: |
| whats "FAIL" mean |
| fool_injected wrote: |
Sometimes your funny Canada  |
|
|
|
|
 |
sierrajim

Joined: 11 Jun 2004
Location: Wheeling in my backyard
|
Posted:
Thu Feb 10, 2005 8:02 am |
|
actually the construction of the Silverado/Suburban chassis are amongst the strongest on the planet.
They run Hydro formed sections for the front 3rd which is where most of the load and stress is applied.
BTW
Maybe FUH2.com should get a hold of a 4.8ltr Petrol Patrol. Atleast with the H2 you get the horsepower. |
_________________ James
| MissForby wrote: |
| If you're going to ride my ar$e you could at least pull my hair |
|
|
|
|
 |
Utemad

Joined: 02 Aug 2004
Location: Brisbane
|
Posted:
Thu Feb 10, 2005 8:25 am |
|
I'd think that the issue FUH2 have is not just poor fuel economy. I'd imagine the 4.8 Patrol gets better then 10mpg anyway. 10mpg is what my brothers 5.7L V8 carby Cruiser gets and it is near impossible to keep the fuel up to that thirsty thing. However the H2 weighs in at 3855kg and the Patrol at 2350-2530kg depending on spec so those extra horsies you mention are going to be needed just to get that extra 1325kg moving.
I'm also sure that you would know that it takes more than a strong chassis (which it would want to be having all that weight) to make a good off road or on road vehicle.
Let me know if I have converted incorrectly as our F250 dual cab 4x4s only weigh in at 3300kg so 3855kg sounds like it is almost too heavy. |
_________________ 1994 Land Rover Discovery update manual V8 |
|
|
|
 |
ozhumvee

Joined: 25 Jan 2004
|
Posted:
Mon Feb 14, 2005 7:17 pm |
|
There are a few Humvee's in Melb that I know of, one in the TLCC too.
Two are regulalry used off road.
There are two in Sydney, mine is the only one used off road regularly up here.
There are two for sale, one reg RHD with twin airlockers, $50k from memory.
the other is nearly finished converion wise but unreg.
It will go down nearly any track that a 100 series or GU goes down it is only 200mm wider than them. |
_________________ Peter
Sydney
M1026 Humvee |
|
|
|
 |
bj42turbo

Joined: 27 Jul 2003
Location: Mornington Peninsula, Victoria
|
Posted:
Sun Apr 03, 2005 11:26 am |
|
|
|
|
 |
ozhumvee

Joined: 25 Jan 2004
|
Posted:
Sun Apr 03, 2005 11:51 am |
|
Yes it is the twin of mine and belongs to friend from Melbourne.
Peter |
_________________ Peter
Sydney
M1026 Humvee |
|
|
|
 |
grimbo

Joined: 15 Nov 2002
Location: Driving my GU in Melbourne
|
Posted:
Mon Apr 04, 2005 10:57 am |
|
| ozhumvee wrote: |
| It will go down nearly any track that a 100 series or GU goes down it is only 200mm wider than them. |
but it is the track width which can be the killer. I have been out a few times with a Hummer around Toolangi, Gembrook and Warburton areas. All are prone to deep ruts and the Hummer has had problems fitting into the ruts whichh makes it a problem when it gets quite tight and twisty |
_________________ YELLOW |
|
|
|
 |
Hoppy11

Joined: 26 Feb 2005
Location: Geraldton West Oz
|
Posted:
Thu May 05, 2005 12:10 am |
|
They are so fuel heavy due to their weight, I read somewhere that the bare chassis weighs about 3 quarters of a tonne alone, tough chassis eh, but if you want one that looks the same and fits in the ruts, then go for the Rhinobuggies convertion
http://www.rhinobuggies.com.au/hammers.htm |
|
|
|
|
 |
ozhumvee

Joined: 25 Jan 2004
|
Posted:
Thu May 05, 2005 6:32 pm |
|
Sorry you are wrong on the weight issue, as far as the my Humvee goes anyway, registered weight over the weighbridge after the RHD conversion and with all the stuff fitted for rego it weighed 2.7t which is about what any cruiser weighs on a weighbridge.
Bear in mind this is with all fluids and fuel, not adry production weight which is what most vehicles are registered as.
Fuel economy is no worse than my 1hz powered troopy was, but it is a bit slower due to the 3 speed trans.
The civvie hummers do weigh a lot more as they have all the crap in them. |
_________________ Peter
Sydney
M1026 Humvee |
|
|
|
 |
Hoppy11

Joined: 26 Feb 2005
Location: Geraldton West Oz
|
Posted:
Thu May 05, 2005 11:25 pm |
|
Yea , but the Humvee's have a lighter ally body, not a steel one.
I got the weight info from ebay, when a humvee chassis was up for sale(pic attatched), but I could be wrong!! |
|
|
|
|
 |
ozhumvee

Joined: 25 Jan 2004
|
Posted:
Fri May 06, 2005 5:14 pm |
|
The main body tub on all of them is aluminium as is the windscreen frame, the bonnet is Kevlar composite on all of them too.
The light armoured humvee's (which mine is) have compsite doors and 10mm thick windows, a full ROPS cage and turret, steel armour roof and slantback as well as armour plate inside the ally body and around the engine.
As I said the civvie Hummers share the same basic ally body shell with a steel roof and doors. It is all the crap inside that adds to the weight, trim flash seats, carpet, soundproofing, sound systems etc.
A full civvie hummer would weigh in excess of 3 tonne but has a bit more grunt than mine.
The chassis on the latest ones (after late 90's) is heavier due to upgraded carrying capacity.
that is a humvee chassis fitted with bias ply tyres. |
_________________ Peter
Sydney
M1026 Humvee |
|
|
|
 |
Gordo

Joined: 08 Mar 2003
Location: Canberra, ACT
|
Posted:
Mon May 09, 2005 1:27 am |
|
Hey Peter,
Not sure if it was u I chatted to outside Overkill a year or so ago...either way Hi !
A fairly stout Fijian bloke at work is keen on one and I told him about the ex-mil reassembled (from the Gulf ?) camo fastback ones like yours were avail about the $60K mark somewhere.
Who does em ? How much, am I close ? Cheers. + Are they all 6.5L's ?
The guy at Overkill also said he had to replace the glass with non-bulletproof and change indicators to meet ADRs ??
The M16 holders in the cab were kinda cool  |
_________________ 97 TJ Goatsack |
|
|
|
 |
Gordo

Joined: 08 Mar 2003
Location: Canberra, ACT
|
Posted:
Mon May 09, 2005 1:29 am |
|
Hey Peter,
Not sure if it was u I chatted to outside Overkill a year or so ago...either way Hi !
A fairly stout Fijian bloke at work is keen on one and I told him about the ex-mil reassembled (from the Gulf ?) camo fastback ones like yours were avail about the $60K mark somewhere.
Who does em ? How much, am I close ? Cheers. + Are they all 6.5L's ?
The guy at Overkill also said he had to replace the glass with non-bulletproof and change indicators to meet ADRs ??
The M16 holders in the cab were kinda cool And he was also quite surprised how light the mil-spec ones are for their size. Maybe something aprt from the alloy/kevlar construction to do with the no carpet, stereo, sound deadeneing, etc |
_________________ 97 TJ Goatsack |
|
|
|
 |
Timmy

Joined: 24 Sep 2003
Location: Redcliffe/Brisbane
|
Posted:
Mon May 09, 2005 9:54 am |
|
| Gordo wrote: |
Hey Peter,
Not sure if it was u I chatted to outside Overkill a year or so ago...either way Hi !
A fairly stout Fijian bloke at work is keen on one and I told him about the ex-mil reassembled (from the Gulf ?) camo fastback ones like yours were avail about the $60K mark somewhere.
Who does em ? How much, am I close ? Cheers. + Are they all 6.5L's ?
The guy at Overkill also said he had to replace the glass with non-bulletproof and change indicators to meet ADRs ??
The M16 holders in the cab were kinda cool And he was also quite surprised how light the mil-spec ones are for their size. Maybe something aprt from the alloy/kevlar construction to do with the no carpet, stereo, sound deadeneing, etc |
hey gordo,
a friend of mine up here has about 6 military ones that he is selling, 2 door utes, 4 door utes and slant backs. unconverted military spec. im pretty sure they were around the 60-70K mark......let me know if your friend wants anymore info and i can pass you on his phone number. |
|
|
|
|
 |
Gordo

Joined: 08 Mar 2003
Location: Canberra, ACT
|
Posted:
Mon May 09, 2005 10:19 am |
|
Timbo,
PM 4 U |
_________________ 97 TJ Goatsack |
|
|
|
 |
|
|