Hi Steer Pitman Arms

Joined: 08 Nov 2002 Location: Mainland, NZ

Wot is the shortest pitman arm you can get

Posted: Tue Mar 25, 2003 11:15 pm

dunno but i run a 100 series one on mine

i can get measurements 2mora if u want

Joined: 08 Nov 2002 Location: Mainland, NZ

Cheers, a measurement would be kool

Joined: 15 Feb 2003 Location: Shed.

want me to measureize 60 and 70 (bundera) series ones? have one of each, spoze they're for sale.

Joined: 08 Nov 2002 Location: Mainland, NZ

yep that would also help

measured an 80 series which is about 180mm between hole centres, looking for a real short one !!

Posted: Wed Mar 26, 2003 7:03 pm

wot model 80 series coz if it is 95 or later it is the same as a 100 series arm. not sure wot the difference between the early and late model arms r tho.

Joined: 08 Nov 2002 Location: Mainland, NZ

the one I measured was about 1990

Posted: Wed Mar 26, 2003 7:18 pm

just measureed mine now dude and its bout 180mm between hole centres so maybe they r they same all thru the models or maybe the dude at the wreakers gave me the rong 1 Confused

Joined: 03 Dec 2002 Location: Silverwater

We use the IFS pitman arm as it is the shortest we know of and we sell the pitman arm and tierod adapter for $150...

Posted: Wed Apr 02, 2003 6:53 am

lachlan do u have a pic of the IFS pitman arm and the adapter ?

Joined: 22 Oct 2002 Location: Your Mummas House!

the IFS arm does not wrk well with leaf sprung front ends

shorter by around 10mm over a 75 series pitman is the 40 series piman when used in the right way. the two shortest ones i can think of off-hand

hilux factory steering arm (too much drop though very short) should fit

daihatsu feroza = perfect

Joined: 22 Dec 2002 Location: sydney

ifs pitman with adaptor