Rodeo Mods.

Joined: 26 Oct 2002 Location: Melbourne

I took a mate of mine on a 4x4 trip recently and he is totally hooked now.
He has his own business with a few vehicles and one of them is a late 90's Rodeo the prime candidate for modding.
It's totally stock standard except for a canopy.
He wants to do it up to be able to do medium to hard stuff plus be practical enough for camping trips.
It has the 3.2 V6 DOHC so has plenty of poke.
He's talking about a bullbar plus winch, a 2" lift with 31-32" muddies and even a front ARB locker.
What's the go Isuzu fella's ?? What size tyres can they run ?? How good is the stock limo, anything to be aware of etc.......

Thanks, Frank.

Joined: 15 May 2003

31's will fit witout any mods. 32's will fit with a little torsion bar twist, and will depend on the rim offset. with 2" lift no problems even with 33's.

Joined: 26 Nov 2002 Location: Nannup, Western Australia

Hey Frank,

I'm afraid that I cant offer much detail but you can pretty much do the same to a Rodeo that you can to the Jackaroo in terms of mods.
ie: Front/rear lockers, suspension etc... As far as bigger tyres go, 32s "should" comfortably fit under there with a 2" lift but best to try before you committ. From what I can remember, I havent seen any seriously modified Rodeos in Australia or OS so you mate may have to be a bit of a pioneer.

Did you see Roothies review of the Rodeo in the last 4x4Monthly? It was probably quite accurate in terms of build quality and reliability but I was a bit annoyed about his constant mention of its poor offroad ability. Just one mention would have sufficed. Anyway, I think a Rodeo could be quite a good performer offroad with some decent clearance, bigger tyres and a locker or two.

Noel

Joined: 21 Feb 2003 Location: Sydney

Hey Frank,
Calmini in the states sell bits for holden/isuzu.

Sure u should be able to find it on the net..

hope it helps..

rob

Joined: 26 Oct 2002 Location: Melbourne

Thanks fella's I'll pass it on.
I get the feeling with this bloke that after a few mods and successive 4x4 trips he will spend some serious $$ on it Cool

Joined: 29 Jan 2003 Location: Tweed Coast

A mate of mine has a V6 rodeo Dual cab. Hes got a lock rite diff lock in the front. He has just had some realy strong extended shackles made up. He got a set of ball joint spacers brought over from overseas.

He only had the gear fitted a couple of weeks ago and also had a balljoint flip done. The rodeo now wears a set of 32 inch cooper st's.
I wouldn't go over a 32 inch unless u give the front guards a bit of a trim otherwise the tyres may scrub when u turn the wheels.

A very capable rig with plenty of clearance The Finger

Joined: 26 Nov 2002 Location: Nannup, Western Australia

Cool

Pics?

Is your mate on the net? Maybe he could join us here.

I'd like to know more about where/who he imported the spacers through.

Thanks,

Noel

Joined: 29 Jan 2003 Location: Tweed Coast

Quote:

Cool Pics?

Is your mate on the net? Maybe he could join us here.

I'd like to know more about where/who he imported the spacers through.

Thanks,

Noel

I have got a pic but it's a little bit dark. My mate borrowed a set of 33 inch Baja Claws and put them on the front before he did the lift and he took a pic. Hes going 2 email the pic 2 me soon Very Happy

I'll find out where he got the spacers from but since then hes had a few spaces made localy.

Joined: 02 Feb 2004

Westoztroopa wrote:

Cool

Pics?

Is your mate on the net? Maybe he could join us here.

I'd like to know more about where/who he imported the spacers through.

Thanks,

Noel

Got some of those spacers if you're after them.

Leroy

Joined: 26 Nov 2002 Location: Nannup, Western Australia

Thanks Leroy but might just sit on it for a while until I find out whats going on with 4x4 mods and legalities over here in WA.

So have you got them on an Isuzu? What are your thoughts on them?

Noel

Posted: Thu Feb 05, 2004 6:09 am

I will be lifting mine soon...... gonna do the shackle thang... and reset the torsion bars.... should be able to do at least 3 inches lift..... i'll do pics when i actually get to it. I have an old control arm from my vehicle, i'm going to make spacers myself and flip the ball joints.... the guy here that does the rego inspections says it will pas here for rego Cool

Posted: Thu Feb 05, 2004 6:11 am

oh and one other thing.......... If you want to totally change the way your isuzu performs off raod... remove the front sway bar. I did on mine and the difference is HUGE off road, plus it doesn't make a great deal of difference on road, just a little more body roll, but it's not dangerous Laughing

Joined: 26 Nov 2002 Location: Nannup, Western Australia

Be interested to hear how it all goes Roedao.

I agree about the swaybar. Havent totally disconnected mine but have the articulator quick disco which does a reasonable job. Makes it a more comfortable ride offroad that anything. I dont bother to reconnect onroad as the change is negligable.

Noel

Posted: Fri Feb 06, 2004 5:16 am

Westoztroopa wrote:

Be interested to hear how it all goes Roedao.

I agree about the swaybar. Havent totally disconnected mine but have the articulator quick disco which does a reasonable job. Makes it a more comfortable ride offroad that anything. I dont bother to reconnect onroad as the change is negligable.

Noel

That would be handy Noel, but the problem is there is nowhere to put a quick disconect on it.... the connecting arms are only about 2 inches long Rolling Eyes

Joined: 09 Nov 2002 Location: Traralgon Vic Aust.

The new Jack has a rear sway bar!!! Well had a rear sway bar. It sorta fell off last week end. the strangest thing!!!! Rolling Eyes

Joined: 26 Nov 2002 Location: Nannup, Western Australia

Yeh, that could be a bit of an inherant problem Dazz. Infact I think that may happen to mine in the near future if I am not careful! Very Happy

Noel

Joined: 26 May 2003 Location: brisbane

do a 2'' body lift and get a kit from www.calmini.com . i think they are 3'' . then run some 35's Twisted Evil

Posted: Fri Feb 13, 2004 5:01 pm

then it begins to cost for the new diff ratios....... 700 bux per diff i'm told Rolling Eyes

I just put 31's on mine, much bigger than standard and don't drag too much.... and they look good Cool

Joined: 02 Feb 2004

Westoztroopa wrote:

So have you got them on an Isuzu? What are your thoughts on them?

Noel

I had the ball joint spacers on my 2000 Rodeo and was the only way to get a good wheel alingment after a torsion bar crank. I also cut the bump stops. I had the leaves in the rear reset with extra leaf to match the front. In all got almost 3" front and rear.

Leroy

Posted: Wed Apr 07, 2004 6:00 pm

I'm a little worried about adding a spring to the rear...... did it do much to your articulation? i'm not too sure about stiffening the rear of the vehicle.

Joined: 02 Feb 2004

I had the extra leaf added for extra load carrying. Fine with a load but without it was so stiff. If I were to do it again I would buy some new Enforcer leaves like a mate did and they seem to give a good unladen ride and also extra load carrying.

Leroy