Another SASd j top

Joined: 26 May 2005 Location: Sunshine Coast, QLD

good effort mate, and coilovers Cool

sits about as high as mine does Laughing

get some 35"s and yeh take the bodylift out, wish i could take mine out, few restrictions but we'll see.

dean Wink

Joined: 18 Nov 2004 Location: New Zealand

Hi Sam, you still about big fella?

You vehicle looks great. A bit like a go cart but hey, 35 's + should fix that. Maybe a wheelbase stretch! Very Happy

Are your coil overs adjustable for height?

If you don't take the body lift out then there is a brilliant opportunity to chop the chassis behind the rear panhard mount and raise that dam petrol tank.

Cheers, G

P.S. I bought the JTop, Rolled, V6, locker.... $400 Very Happy

Hope it goes!

Joined: 13 Nov 2007 Location: NZ

yeah im still about.. just had alot to do lately. that jtop would have been mine if it wasnt on that side of the ditch!! haha.. good score tho.
time to give spanky a call Wink

Sam

Joined: 29 Aug 2005 Location: western shitney

paj is lookin Cool

giving me more incentive to do it to mine Very Happy

Joined: 06 Jul 2005 Location: Perth, Western Australia

SCHWEEEEET!

Joined: 26 Mar 2008 Location: Brisbane

Oh, dude... That's cool!!

I need to do something like that to mine!

Joined: 13 Nov 2007 Location: NZ

im on to the steering fluid lines now. can frank or hekta or someone tell me what they did with the steer fluid cooler pipe thing that (currently on mine) hangs down flaping in the breeze?

half way through the ifs hub swap, just got to put the left hub together. the calipers have been milled down so they work and just got to rebuild them and paint em and on they go.

tierod is going to the engineers tomorro to get shortened then the draglink on thur i hope.

gota get it going for a trip this weekend! teh pressure is on!

Sam

Joined: 18 Nov 2004 Location: New Zealand

If no response you might have to go have a sneak peek under JTop's.....

Joined: 27 Jan 2006 Location: Wellington NZ

WACKO wrote:

gota get it going for a trip this weekend! teh pressure is on!

you better have it going aswell. Ive got the 37's sitting here waiting for ya because it looks like the hilux isnt going to be goin on the weekend Crying or Very sad

Joined: 13 Nov 2007 Location: NZ

hhaha.. ive got some 35s off sig now. had a lack of power with 35s last time so ill see how these go... i may pop up and try the 37s tho.... just for s#$ts and giggles tho...

Sam

Joined: 13 Nov 2007 Location: NZ

NJV6 wrote:

If no response you might have to go have a sneak peek under JTop's.....

good idea.. might just do that...

Joined: 13 Nov 2007 Location: NZ

been working on it steadily all week, but run into some problems.

went and got bolts for the coilover mounts... even tho i supplied a sample they still supplied the wrong ones and arnt open again till tue so im off to hunt a couple of other places tomorro. found the 60 series ball joint doesnt fit into the prado pitman arm, so going to try a prado balljoint tomorro.also fount the tierod is hitting on the panhard mount on right hand lock. so going to have to take some off that till it clears.

on the up side, the power steering box is plumbed up. got the connectors for th toyota box off a surf and took the old lines into a hydraulics place, $15 later and they were done. no cooler at the moment, but will have before long, and the ifs hub swap is finished.

hopeing i make some decent progress tomorro as i feel like i havent made stuff all today!

Sam

Joined: 18 Nov 2004 Location: New Zealand

bumpety bumpety...

Unless she is worth it - forget snowboarding - get this dam thing finished!

Joined: 29 Aug 2005 Location: western shitney

updates?

Joined: 18 Nov 2004 Location: New Zealand

Its winter. And Sam only does one thing then - watching girls on snowboards Cool

Joined: 13 Nov 2007 Location: NZ

they are alll worth it!!!

Joined: 13 Nov 2007 Location: NZ

got my tyres yesterday, so couldnt resist putting them on and doing a little bit of a flex test on a dodgy little ramp... still no brakes and the short side axle isnt in so i only had 2wd.

even fits in the garage still!

Joined: 13 Nov 2007 Location: NZ

sorted the p/s cooler tonight. mounted and plumbed up. mounted it behind the right hand headlight. wont get much airflow but as it was justa pipe before i figure it will be fine as its a lancer evo 4 cooler.

now i just want to know if i need to be carefull of anything with it? its not mounted too high in the engine bay, plumbed up wrong or somthing?

cheers, Sam

Joined: 06 Nov 2007 Location: Melbourne

wouldn't want to blow a headlight globe now, might be a tad tricky to get to. Looks awesome though, SAS'd paj's look a whole lot better than lifted patrols IMO.

Joined: 01 Mar 2007 Location: Brisneyland

WACKO wrote:

Looks ver narce!!

But your coils look pretty closely spaced (to an untrained eye). Not going to suffer coil-lock before hitting the bump stops on up-travel?

Joined: 18 Nov 2004 Location: New Zealand

They are coil overs.

Sam, looks good mate. Now build yourself a proper ramp to get the rear end working properly and then show us what it can do.....

Joined: 13 Nov 2007 Location: NZ

Greg_M wrote:

wouldn't want to blow a headlight globe now, might be a tad tricky to get to. Looks awesome though, SAS'd paj's look a whole lot better than lifted patrols IMO.

the buld thing did occur to me. especially after i put the airbox back in. theres even less room. but if it does happen, its just two screws to undo and i can access it just as easily as before.

and NJV6, ill take it up to turoas at some stage and put it on the proper ramp. gota do the breaks and put the short axle in first tho. wana have it running for a play in rallywoods in two weeks so hopefully i make it this time. the tyres gave me incentive again...