I am now making and selling trailing arms. They are a bolt in arm with a Hemi/Rose joint on the diff end. But I will also make some with the standard fitting on the diff end if you are worried about engineering. They will be made to order and the bend will be made to the spec's of your vehicle (unless you specify differently).
They are made out of 34mm tube and 7mm wall. there will be a money back guarantee on them too. If your not happy then send them back, no problems.
Price: $500 a pair
I am getting some springs made to get maximum flex available out of the trailing arms.
I will also be making a bolt in A-frame mod in the future.
_________________ OVERKILL ENGINEERING 9476 6137
DAS
100" Series II Land Rover
95 Discovery.....The tow rig
modman
Joined: 22 Jul 2003
Location: melbourne
Posted:
Mon Oct 20, 2003 8:58 pm
good timing, i just bent one of mine!
would you consider making them with a johnny joint or similar from calbah big balls or wizard.
just from an engineering poirt of view?
thanks,
modman.
GURU
Joined: 06 Mar 2003
Location: Sydney
Posted:
Tue Oct 21, 2003 12:31 am
Check PM
_________________ OVERKILL ENGINEERING 9476 6137
DAS
100" Series II Land Rover
95 Discovery.....The tow rig
Go to OuterLimits4x4 View next topic View previous topic
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
FAQ
Search
Memberlist
Register
Profile
Log in to check your private messages
Log in
