| Author |
Message |
KIWI
Joined: 30 Jan 2003
Location: New Zealand
|
 Posted:
Mon Feb 24, 2003 2:41 pm |
 
|
Found this interesting front swaybar disconect.
[url]offroad.com/toyota/cheaptricks/swaybar2[/url]
Hope this works. 
Dave |
|
|
|
|
|
Westoztroopa
Joined: 26 Nov 2002
Location: Nannup, Western Australia
|
| Posted:
Mon Feb 24, 2003 6:47 pm |
|
Looks pretty simple. I'm still going with the Articulator though...
Noel |
|
|
|
|
|
KIWI
Joined: 30 Jan 2003
Location: New Zealand
|
| Posted:
Thu Feb 27, 2003 3:53 pm |
|
|
|
|
|
Westoztroopa
Joined: 26 Nov 2002
Location: Nannup, Western Australia
|
| Posted:
Thu Feb 27, 2003 10:07 pm |
|
So which type is your front swaybar disconnect Dave? Is it like the ones above or like the Articulator?
Noel |
|
|
|
|
|
dinos4x4
Joined: 04 Nov 2002
Location: perth western australia
|
| Posted:
Fri Feb 28, 2003 12:31 am |
|
hello noel
just remember when you get a articualor as soon as you a ready to go offroad take the pin out because i have snapped 2 pins from forgetting to take the pin out then going over rough terain. |
|
|
|
|
|
KIWI
Joined: 30 Jan 2003
Location: New Zealand
|
| Posted:
Fri Feb 28, 2003 6:32 pm |
|
Same as ones above, still not on vehicle yet.
Seemed to be the easiest to install and use, interested to hear what your thoughts on articulator are.
Mine cost $45, which seemed good for the improvement it is supposed to make. |
|
|
|
|
|
Westoztroopa
Joined: 26 Nov 2002
Location: Nannup, Western Australia
|
| Posted:
Fri Feb 28, 2003 7:20 pm |
|
| djspajero wrote: |
hello noel
just remember when you get a articualor as soon as you a ready to go offroad take the pin out because i have snapped 2 pins from forgetting to take the pin out then going over rough terain. |
Thanks for the advice Dino. Will be a while before I actually get it and install it but will keep that in mind.
Articulator is a fair bit more than that Dave, but looks well made and should last a while (apart from the pin that is :wink: ).
Noel |
|
|
|
|
|
CJ Burns Esq
Joined: 28 Jan 2003
Location: North Sydney 'ish
|
| Posted:
Fri Feb 28, 2003 7:58 pm |
|
|
|
|
|
Westoztroopa
Joined: 26 Nov 2002
Location: Nannup, Western Australia
|
| Posted:
Sun Mar 02, 2003 6:48 pm |
|
The Articulator is a quick release swaybar disconnect made by Bitsamissin (Frank) and his mate... It was originally designed for the Pajero, but should be fairly easily adaptable to other IFS designs. I have ordered one but it wont be ready for a while and I wont have time to put it in for a while anyway...
Here's the site http://www.peppernet.org/articulator/
See also original thread in GMH/Isuzu main menu.
Cheers,
Noel |
|
|
|
|
|
|
|
FAQ
Search
Memberlist
Register
Profile
Log in to check your private messages
Log in
