The Jabber Renaissance Project - SAS

Joined: 26 Oct 2002 Location: Melbourne

Well angle grinders and cold chisels have been in contact with my IFS front end.
The bulk of it was removed yesterday (not without drama) and Blair (Noisey) was on standby with a trailer to take away the goodies for his swb Very Happy

Only the upper wishbones left to come out then the chassis rails are cleaned up (all IFS mounts removed etc).
I'll try and post pics as Cheezy progresses, can't wait Twisted Evil

Joined: 20 Nov 2002 Location: Melbourne

And so it begins Twisted Evil

Looks naked without all that IFS stuff Shocked

Posted: Mon Aug 16, 2004 12:13 pm

the magazines are starting the bidding war for the story now... who are you going to let run it Bitsa?

Joined: 26 Oct 2002 Location: Melbourne

Most likely Michael Ellem will do the story for 4x4 Australia.

Joined: 20 Nov 2002 Location: Melbourne

& moose dropped off that Zook diff today !!

83 narrow track , wasnt it ???? Very Happy

Joined: 26 Oct 2002 Location: Melbourne

Hehehe.............yep Wink

Should be able to squeeze some 31"s under the chassis rails Laughing

Joined: 29 Jul 2004 Location: South Australia

Bitsamissin wrote:

Most likely Michael Ellem will do the story for 4x4 Australia.

so whats the story with Michael Ellem ? read in 4wd monthly this month that he has moved on.
he certainly can take a great shot!

i dont seam to be able to view your pic of the 'naked front end'. any tips ?
cookie monster

Joined: 24 Oct 2002 Location: On the end of the phone

Yep its up and started and all stripped out, the new housing is getting the cut and shut bit ATM and lockers and gear sets fitted next week. I have taken lots of pics and so has Frank so all will see whats going on. And yes Mr Ellem will be doing pics of the rig when done. Very Happy

Joined: 03 Jan 2003 Location: USA

weeeeeeeeeeeeeeeeell???

Wtf mate, wheres the pics. Laughing

Joined: 04 Apr 2004 Location: Aotearoa

I agree Doug,the posts are far to far apart
J Top

Joined: 26 Oct 2002 Location: Melbourne

There is a problem with the forum atm with posting pics the administrators are trying to fix.
Basically we are still waiting for the front housing to come back to finish the front.
The front chassis rails are all ground back and it looks naked.
Another thing to is the factory front crossmember gets replaced with a custom one mounted between the chassis rails. This will give a lot more front clearance as the factory one hangs down about 2" or so.

Joined: 03 Jan 2003 Location: USA

*tapping foot*

The Finger

Joined: 24 Oct 2002 Location: On the end of the phone

FAAAAAAAAAAAAAAAARK, I finally got he housing back today and all is good to get it all going. man the joint that did the diff flip took ages but all is good. Rolling Eyes

Joined: 26 Oct 2002 Location: Melbourne

Hmmmm me got a stiffy............................... Twisted Evil

Joined: 25 Sep 2003 Location: "Shit"ney

This is all a myth without pics Frank.

If you have to, you could email every person on this board directly.

Otherwise how do we know your not just full of shiiiiiit. Laughing

Joined: 03 Jan 2003 Location: USA

Exactly... lol.

Frank if you dont take a ton of pictures I will hate you for ever. cussing

Now when you say diff flip you didnt flip the diff upside down did you. I am thinking you just took the longside axle and swaped sides in order to get the pinion on the right side.

I cant wait to see how you do the coil front. I might be using it as starting point in a year or two.

Frank, I will host all the pictures on my website for you, plus an writeups you want to do. Think about it, I have all the space in the world, unlimited pictures of the build up.

I have offered to do the same for other people that have unique trucks.

www.bentidler.com is the address, it isnt up to speed yet but it is going to be the same site as monterooffroad.com that I used to have before it crashed and I lost all the files.

Joined: 26 Oct 2002 Location: Melbourne

G'day Dougie.
The front diff was re-tubed to move the pinion to the left hand side and the knuckles cut & rotated.
The forum has lost the ability to post pics from PC's for the time being and my ISP provider has recently decided that you can't link to your free webspace anymore. So at the moment I have no way of posting pics.
There are only 2 pics so far of the stripped front end and ground back chassis rails I'll send them to you so you can post them up.
Cheezy says they will be full steam ahead on monday so the pics will start to come.
I think you will be impressed how he sets up the 5 link front a lot of comp guys are now using this system for high speed stability and extra flex with great results Very Happy

You can check out his comp buggy and examples of other work on his website (the link is in his post above).

Joined: 03 Jan 2003 Location: USA

Well if you can email me what ever pictures you get, email them to me and I will host them.

If your email host wont let you send them email me your personal email, and I will send you an invite to gmail. Then you can send 20mb files, and store up to 1 gig.

Joined: 26 Oct 2002 Location: Melbourne

Joined: 26 Oct 2002 Location: Melbourne

Some more pics from today of the re-tubed housing, new crossmember (check out the extra clearance) and upper & low link mounts.
Things are moving along nicely now Very Happy

Joined: 25 Sep 2003 Location: "Shit"ney

Has cheezey moved or did he sweep the floor. Laughing

Still not sure your telling the truth Frank - more pics needed.

Joined: 26 Oct 2002 Location: Melbourne

Yep thats in his new workshop, heaps bigger and much more room to move and organize stuff. Has 2 hoists now as well.

Joined: 26 Oct 2002 Location: Ringwood East, VIC

Frank,

Did you get the knuckles rotated to change pinion angle or are you going to deal with that "on-truck"?

Very Happy

Joined: 26 Oct 2002 Location: Melbourne

Yeah I believe they have been rotated Laughing

Joined: 26 Oct 2002 Location: Melbourne

Some more pics from today Very Happy

Joined: 21 Sep 2004 Location: Warsaw, Poland

Hi ! Here are the pictures of SAS project from Poland
Enjoy ! Cool

http://www.rajdy4x4.pl/ciekawostki/pajero/

Joined: 06 Jan 2003 Location: USA

DONE YET??

Joined: 06 Sep 2003 Location: mental house

Lordtrunks wrote:

DONE YET??

yeah done yet??? Question

Posted: Fri Oct 22, 2004 7:25 am

GEEEZ Frank !!!
where,s the UPDATES !!!!?????????????

here,s 1 !!!
its now nude out the back as well !!!!

& those trailinnnnnggggggg arms are looonnnngggg !!!!!! Very Happy

& the ute conversion is SWEEEETTTTT !!!!!

Joined: 26 Oct 2002 Location: Melbourne

Yeah checked it out today. The rear A frame is almost done just needs shock mounts and some other little stuff. Flex will be MUCH better Very Happy