WHats the wheel stud thread size on a paj?

Joined: 27 Aug 2004 Location: sydney

I have some Factory mags i bought off here ages ago, and they have a square hole for the nuts instead of a taper.

I was hoping to find out if the paj nuts will fit on my Nissan, might save a few $$ and headaches chasing up some nuts.

Thanks

P.S. Or will tapered nuts holem on no probs. Its going to be pretty much an on road toorak tractor

Joined: 20 Jul 2005 Location: Heidelberg...Melbourne

You'll have to get square section nuts and washers. Don't think they're that expensive. I wouldn't use your old tapered nuts as they wont seat properly!

Joined: 27 Aug 2004 Location: sydney

apparently there 12x 1.5 mm . same as toyota but not nissan. cussing

thanks anywayz guys

Joined: 11 Jan 2004 Location: Adelaide

FWIW, I had some Nissan (Skyline) alloys converted to tapered seat inserts so I could run tapered wheel nuts.

I don't remember the price, but it was cheaper than buying the required wheel nuts. Four or five years later, and they're still going strong. Smile

Joined: 05 Oct 2006 Location: Tooradin, Vic. Aust.

pongo wrote:

apparently there 12x 1.5 mm . same as toyota but not nissan. cussing

thanks anywayz guys

You are correct. Paj's are 12mm x 1.5 same as Toyota. Nissan's 12mm x 1.25.

I can't tell you of a simple fix 'cause I don't know of any Nissans running that style of wheel nut. Be careful also of the diameter of the shank of the wheel nuts as this helps locate the wheel rim along with the centre boss of the hub.

Hope this helps,

Yonnee.

Joined: 29 Aug 2005 Location: western shitney

Yonnee wrote:

pongo wrote:

apparently there 12x 1.5 mm . same as toyota but not nissan. cussing

thanks anywayz guys

You are correct. Paj's are 12mm x 1.5 same as Toyota. Nissan's 12mm x 1.25.

I can't tell you of a simple fix 'cause I don't know of any Nissans running that style of wheel nut. Be careful also of the diameter of the shank of the wheel nuts as this helps locate the wheel rim along with the centre boss of the hub.

Hope this helps,

Yonnee.

are you sure dude? now im Confused

im sure i had the nuts from my paj on my pootrol and vice versa Confused

Joined: 04 Apr 2004 Location: Aotearoa

No way do nissan and Paj wheelnuts interchange
J Top

Joined: 23 Sep 2006 Location: Perth

Nissan are 12 x 1.25, same as Suzuki.

Mag nuts should cost around 2.50 ea, with washer

.

.

Joined: 27 Aug 2004 Location: sydney

yeah, I might just resell the rims on ebay, unless some one here wants them for what i paid

Cheers