The light on my centre diff lock (LT95) goes off 'sometimes' mainly when on the gas! Its not electrical but not sure whether the diff is moving back and forth (shims) or the drop in vacuum, with the loud pedal down, is causing the selector to release a bit of pressure on the fork! Anyone have any ideas before I pull it all to bits and waste a heap of time and gaskets.
Any help greatly appreciated!
PS switch is shimmed correctly as per manual!
Strange Rover
Joined: 20 Oct 2002
Posted:
Wed Sep 03, 2003 9:38 pm
Wierd - shouldnt be a loss in vacuum because to dactivate the diff lock vacuum must be swithed to pull the actuater the other.
Loosing vacuum wont make the centre unlock cause you can engauge the centre and then turn the motor off and it stays engaued.
Sam
Tony78rr
Joined: 12 Aug 2003
Location: Melbourne
Posted:
Wed Sep 03, 2003 9:50 pm
I see what you mean!
Still does it though!
Not sure what the switch gets pushed in by to turn it on but there must be something dodgy in there! Possibly a loose shaft that moves away under torque?
Go to OuterLimits4x4 View next topic View previous topic
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
FAQ
Search
Memberlist
Register
Profile
Log in to check your private messages
Log in
