2uzfe into 80 has it been done

Joined: 15 Apr 2009 Location: Rockhampton

2uzfe into 80 has it been done what are the dramas with doing this

Joined: 08 Nov 2002 Location: sunshine coast

can't say i have seen it done, Have seen one in a supra with 2 superchargers and autronic ECU Laughing

Main issue i can think of is the wiring for the un-experienced. To use the factory computer the factory transponder immobiliser would need to be wire up aswell. Its possible, just a bit tricky.

Steve

Joined: 23 Mar 2008 Location: traralgon

I didn't really read through it but Im guessing it will be usefull.

http://forum.ih8mud.com/80-series-tech/273882-2uzfe-swap-into-fj80-building-progress.html

Joined: 22 Mar 2006 Location: SE Suburbs Melbourne

Auto or manual?
If you have the A442 Auto you need a bell housing from the early 100 series V8.
The main dramas will be wiring the engine in but if you use the computer and wiring from the early 100 series it should be an easier swap.

Joined: 15 Apr 2009 Location: Rockhampton

engine comes with auto box and tranny

Joined: 12 Aug 2003 Location: wollongong

They have imobilisers so you will need the key/ignition lock/wiring. Then you put the 100 ignition under your dash with key turned on all the time, and wire into that with yours.
Andrew