 |
|
| Author |
Message |
Dean85

Joined: 13 Apr 2008
Location: Melbourne, Vic
|
Posted:
Tue Sep 02, 2008 5:47 pm |
|
hi all, dont know to much about disco's and need to confirm something before i purchase any parts, would my 1991 disco V8 have the 10 spline diff centre or the 24 spline? ive done a few searches but come up with nothing any help appreciated!
cheers
Dean. |
|
|
|
|
 |
PSI250

Joined: 18 Aug 2004
Location: S.E Suburbs, VIC.
|
Posted:
Tue Sep 02, 2008 6:24 pm |
|
should be 10 spline unless someones been there before you and upgraded. |
_________________ '86 Hiline, 3.9L, R380, Q78's, F&R Maxi's, Warn 8274 |
|
|
|
 |
kitacooch

Joined: 31 Dec 2007
Location: Gold Coast
|
Posted:
Sun Sep 07, 2008 9:58 am |
|
pretty simple check, just take the rear axle out, 10min job, is floating axle so can be done while wheels on vehicle and no jacking req. Just count the splines on the end of the axle. |
_________________ 95 Disco, 3.9l V8, 35" Coopers, 2" Tuff Dog Coil Lift (Kings and Bilstein to come), True Tracks Font & Rear. ARB Bar, Warne Winch, Sliders, Ford EL power steering pump all now fitted. |
|
|
|
 |
sickgm

Joined: 24 Mar 2008
Location: Morriset NSW
|
Posted:
Sun Sep 07, 2008 5:16 pm |
|
Greetings,
It is for sure a 10 spline diff. I just destroyed one in my 93 Disco and am buying another that came out of a 91 Diso.
Hope that helps.
Unless someone has upgraded to a 24 spline. |
|
|
|
|
 |
lokka

Joined: 07 Sep 2005
Location: STOCKTON NSW
|
Posted:
Sun Sep 07, 2008 11:33 pm |
|
Look at the axle caps on the hubs if they are a domed end with a divet in the center there a 10 spline if they are flatish and have a smaler circle cast in them they are 24 spline my geuss is there 10 spline and you have probaly busted the diff center there piss weak  |
_________________ Cheers
Chris
H/Duty Steering and Suspension gear Chassis and Body Mods Custom Fab in Ally,Stainless and steel PM or Call me 0401648585 |
|
|
|
 |
|
|
Powered by phpBB ::
Theme & Graphics by Daz
All times are GMT + 10 Hours | |