Hi guys, i have just done a reverse shackle and spring over on a 40 series and the shackles are flat when sitting normal, any ideas how to fix this, are the shackles too far forward or too short.
Thankyou.
Last edited by tuff 45 on Mon Sep 01, 2008 6:11 pm; edited 1 time in total
SIMMO84
Joined: 05 May 2008
Location: MACKAY
Posted:
Mon Sep 01, 2008 6:08 pm
lol clearly there too far forward
little rusty
Joined: 04 Aug 2007
Location: Sydney
Posted:
Mon Sep 01, 2008 7:21 pm
longer shackles may work by the looks of it - shorter springs or relocate the shackle hanger would be better
_________________ even when you spell out commonsense to the RTA they still ignore it!
through the frame, build a shackle best fits your set up.
HTH's
crusty
[/img]
little rusty
Joined: 04 Aug 2007
Location: Sydney
Posted:
Wed Sep 03, 2008 11:24 am
here is the front of my shackle reversal - this is how i bought it with flat springs - worked well for rideability but was not built for flex... I now have arched springs with about 3 inches of lift and the shackle sits on a good angle now.
and the rear
_________________ even when you spell out commonsense to the RTA they still ignore it!
Go to OuterLimits4x4 View next topic View previous topic
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
FAQ
Search
Memberlist
Register
Profile
Log in to check your private messages
Log in
