BBM rick bends the rangie!!

Joined: 23 Sep 2003 Location: hornsby

As mention in a members thread here is the photo of BBM Rick bending a 1/4 and then getting towed by OZY1 Very Happy

RICK

Posted: Fri Jul 04, 2008 10:03 pm

Yeah Liam was telling me all about it today! Ouch dude, geez you put those rivets to the test...

PS So who was spotting him to balls that up Very Happy

Joined: 27 Nov 2002 Location: Lost in Melbourne.

wheres the pics of the other side?

Joined: 23 Sep 2003 Location: hornsby

bogged wrote:

wheres the pics of the other side?

Don't want to waste too much camera memory on a rangie. Very Happy

Joined: 22 Sep 2004 Location: Kings Park, NSW

Your a pole smoker Chuck. Payback will be a biatch!!!!!!!!

PS : One of Wayne Murphys mates, Grant was giving me the line. I was questioning it, I wanted to go left. Ozy1 says to me AFTER the fact
"Yeah, I thought your line was the way to go too"
Thanks for that Shawn, info that might have been useful 5 minutes PRIOR to this shot! The Finger

It was all in fun, once the first dent is out of the way, the rest come easy! armsup

Joined: 27 Sep 2007 Location: Townsville

Yeah I give it a 2 out of 10 on the weak o meter, seriously the damage from that hardly warrants a mention. Surely you've done worse than that rick?

Joined: 15 Jun 2005 Location: yinnar south

Why do you need someone to show you a line to go up that in the first place #Turn-l

Joined: 10 May 2004 Location: Kalgoorlie WA

mopar rangie wrote:

Why do you need someone to show you a line to go up that in the first place #Turn-l

hahhaa was thinking the same thing ... Very Happy

Joined: 19 Dec 2002 Location: Sydney

BBM Rick wrote:

Your a pole smoker Chuck. Payback will be a biatch!!!!!!!!

PS : One of Wayne Murphys mates, Grant was giving me the line. I was questioning it, I wanted to go left. Ozy1 says to me AFTER the fact
"Yeah, I thought your line was the way to go too"
Thanks for that Shawn, info that might have been useful 5 minutes PRIOR to this shot! The Finger

It was all in fun, once the first dent is out of the way, the rest come easy! armsup

dude, i agreed with your line when the plastic bumper corner came off, when i saw the panel move, which ment no backwards i dragged it up to reduce further damage,

no, what did you find wit the over heating dramas?

Posted: Sat Jul 05, 2008 8:39 am

roverrat wrote:

mopar rangie wrote:

Why do you need someone to show you a line to go up that in the first place #Turn-l

hahhaa was thinking the same thing ... Very Happy

Otherwise he would ding it. oops. ok better off without a nav. Very Happy

Posted: Sat Jul 05, 2008 8:40 am

It looks like the tyres are at full pressure?

Joined: 29 May 2003 Location: hidin frm da wiminz!!!

4WD Stuff wrote:

It looks like the tyres are at full pressure?

was thinking the same thing.

should have just drove it and accepted the damage that comes along with owning a full bodied rig, thats what I'll be doin armsup

Posted: Sat Jul 05, 2008 9:48 am

I can see that he was wedged so he couldn't drive this one.
Should just carry a 12 Volt cut off grinder and get rid of the bits off the Rangie that get in the way. armsup

Time for some bigger coils Rick.

Joined: 15 Feb 2003 Location: Shed.

is that 80 series hill?

Joined: 22 Sep 2004 Location: Kings Park, NSW

Yep 80 series.
It was a bit tougher than it looks, tyres were at 14psi, and at that pressure they will fold under themselves.
It was the first dent in a fairly pristine truck, but now that its outa the way....look out!! ANyone who saw my 80 will tell you that Im not too worried about panel damage.
GRAPBIT, the damage was on the other side, the whole rear quater was not looking like it once had. About 30 or so people around it all went "ooooohhhhhh" in unison when it happened. Was funnay. Very Happy